Cisco Asr 1006 Slot Numbering
Description
ASR 1006-X Specification | |
| Dimension | Height: 10.47 in. (265.9 mm) Width: 17.2 in. (437.4 mm) Depth: 18.15 in. (461.0 mm) |
| Default memory | 8-GB DRAM RP2 8-GB DRAM RP3 |
| Number of SIPs or Ethernet line cards supported | 2 |
| Shared port adapters | 8 SPA slots |
| Ethernet port adapters | 4 EPA slots |
| Cisco ASR 1000 Series ESP | 2 ESP slots |
| Route processor | 2 route-processor slots |
| Redundancy | Hardware: Yes |
| Built-in Gigabit Ethernet ports | 0 |
| Built-in 10 Gigabit Ethernet port | No |
| Network interface module | No |
| ESP support | Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) |
| ESP bandwidth | 40 to 100 Gbps |
| ESP memory | Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40): 8-GB DRAMCisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM |
| SIPs and Ethernet line cards | Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE line cards (ASR1000-2T+20X1GE); and six 10 GE line cards (ASR1000-6TGE) |
| Embedded hardware-based encryption | Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput |
| Minimum Cisco IOS XE Software release | Cisco IOS XE Software Release 3.16.0 |
| Rack-mounting | Yes: 19-inch |
| Wall-mounting | No |
| External USB flash memory | 1-GB USB flash-memory support |
| Redundant power supply | Yes: Dual power supplies by default, expandable up to a total of six, depending on configuration and redundancy preferences; option of either 1100W AC or 950W DC Note: A mix of AC and DC power supplies is not supported. |
| Power input | Worldwide ranging AC input range (85 to 264 VAC) Worldwide ranging DC (-40 to -72; -48V nominal) |
| Power consumption | ● Maximum (DC): 4600W ● Maximum (AC): 4500W |
| Airflow | Front-to-back |
| Operating temperature (nominal) | Same as for Cisco ASR 1001-X |
| Operating temperature (short-term) | Same as for Cisco ASR 1001-X |
| Operating humidity (nominal) (relative humidity) | Same as for Cisco ASR 1001-X |
| Operating humidity (short-term) | Same as for Cisco ASR 1001-X |
| Storage temperature | Same as for Cisco ASR 1001-X |
| Storage humidity (relative humidity) | Same as for Cisco ASR 1001-X |
| Operating altitude | Same as for Cisco ASR 1001-X |
| Network Equipment Building Standards (NEBS) | GR-1089 and GR-63 |
| EMC standards | Same as for Cisco ASR 1001-X |
| Safety Standard | UL60950-1 CSA C22.2 No. 60950-1-03 EN 60950-1 IEC 60950-1 AS/NZS 60950.1 |
Cisco Asr 1006 Slot Numbering System
Cisco Asr 1006 Slot Numbering Machine
Page 107 SPA 0 SPA 1 SPA 2 Double-height SPA The slot numbering for the SPAs on the Cisco ASR 1004 Router is the same as the numbering on the Note Cisco ASR 1006 Router. Cisco ASR 1002 Router In the Cisco ASR 1002 Router, the Cisco ASR1002-SIP10 supports:. How i can add the number of subscriber session in PRTG.is there any OID or MIB supported by XRv9000 Kind Regards LTE Advanced Network Interface Module for Cisco 4000 SIR Created by abbasali5 on 11:17 AM. Cisco ASR 1006 Router Slot Numbering The Cisco ASR 1006 Router is designed with each slot numbered as shown in Figure 3: Cisco ASR 1006 Router — Slot Numbering, on page Figure 3: Cisco ASR 1006 Router — Slot Numbering. Page 5: Installation Methods. Note: The Cisco ASR 1002-X has the route processor, ESP, and SIP integrated. Default memory 4-GB DRAM shared across route processor, ESP, and SIP Number of SIPs or Ethernet line cards supported Integrated in chassis Shared port adapters 3 SPA slots Ethernet port adapters N/A Cisco ASR 1000 Series ESP Integrated in chassis.